Gas Piping & Gas Line Installation in Billings, MT

Safe, code-compliant gas lines for garage and shop heaters, appliances, and outdoor living — leak-tested and installed before the cold hits.

Wall-mounted black unit with exposed metal and yellow piping against corrugated metal siding

Adding a heater to the garage or shop, a new gas range, or an outdoor kitchen? Gas work is no place for shortcuts. Prime Plumbing installs and extends gas lines that are code-compliant, leak-tested, and safe.


Our plumber handles everything from a single appliance connection to running a new line for shop heat — so you can get warm and get to work before winter. Every gas job is done to code and pressure-tested for peace of mind.


Gas piping services

Black checkmark inside a circle on a white background, indicating approval or completion

Gas lines for garage & shop heaters

Black checkmark inside a circle on a white background

Appliance gas connections (ranges, dryers)

Black checkmark inside a circle icon on a white background

Fire pit & outdoor kitchen gas lines

Black checkmark inside a circle icon, indicating approval or completion

Gas line extensions & repairs

Black checkmark inside a circle, approval or completed icon

Code-compliant, leak-tested installs

Black checkmark inside a circle icon on a white background

Free estimate

Plumber tightening copper pipes inside a wall during home renovation
Black shield icon with a white checkmark inside

Licensed & Insured

Black five-point star icon on a white background

5.0 Google Rating

Black award badge with a white checkmark and ribbon icon

1-Year Warranty

Black document icon with a white checkmark and folded corner

Free Estimates

Red circular logo with white crosshair lines and a stylized lowercase “p” shape.

How The Job Goes

No runaround and no mystery — here's how we run the work from first call to finished job.

Blank white image with a black vertical border on the right side.

01 - Plan the run

Our plumber checks your meter capacity and existing piping, plans the route, and sizes the line for the appliance's actual BTU demand — undersized gas lines are the number-one cause of heaters that never quite work right.

Blank white image with a black vertical border on the right side.

02 - Quote it straight

You get a written price for the whole job — pipe, fittings, permits where required — before any work starts. No allowances, no surprises on the invoice.

Blank white image with a black vertical border on the right side.

03 - Install and pressure-test

The line goes in to code, gets pressure-tested to prove it's tight, and every connection is leak-checked before gas ever flows to the appliance.

Blank white image with a black vertical border on the right side.

04 - Fire up the appliance

Our plumber connects the heater, range, or fire pit, verifies it burns right, and walks you through the shutoff locations. Done once, done safe.


Good To Know

Gas Piping questions, answered straight

till wondering about something? Call or text and you'll reach our plumber directly — the plumber doing the work, not a call center.

  • Can you run a gas line to my garage or shop?

    Yes — shop and garage heaters are one of the most common calls, especially in fall. Our plumber runs the line, sizes it for the heater's BTU load, pressure-tests it, and connects the unit. Call before the cold rush: by the first below-zero week, everyone in Billings wants the same job done.

  • What does it cost to add a gas line?

    The main factors are distance, routing, and whether your meter and existing piping can handle the added load. A range connection near existing gas is a small job; a buried line to a detached shop is bigger. Our plumber looks at your setup and gives you a free written estimate.

  • Is it safe to add another appliance to my existing gas line?

    Only if the piping and meter are sized for the combined load — too many appliances on an undersized line starves them all. Our plumber calculates the total demand before adding anything, and upgrades the piping if that's what it takes to do it safely.

  • Do gas lines need permits and inspection?

    Gas work commonly requires a permit and inspection, depending on the jurisdiction. Our plumber handles the permitting where it's required, and every Prime Plumbing gas job is pressure-tested to code regardless — that part is non-negotiable.

  • I smell gas. What should I do?

    Leave the building right away — don't flip switches or light anything — and call your gas utility from outside. Once the utility has made it safe, call us to find and repair the leak and pressure-test the system properly.

Blank white image with a black vertical border on the right side.

FROM THE RESOURCE SHELF

Guides related to gas piping

Two blue water heaters with white vent pipes in an unfinished utility room with exposed copper plumbing
October 15, 2025
Your boiler is about to work hard for six straight months. An hour of attention in October beats a breakdown in January.

SERVICE AREA

Gas piping for homes and businesses in Billings, Laurel, Hardin, Red Lodge, and northern Wyoming. Get it installed before the cold — call for a free estimate.

Billings, MT

Laurel, MT

Hardin, MT

Red Lodge, MT

Northern Wyoming


Get It Done

Get a real number for your new construction project — free, in writing, from the plumber who'll do the work.

406-426-3128