Boiler Repair & Installation in Billings, MT

Boilers, radiant floor heat, and snow-melt systems installed, upgraded, and repaired to keep you warm through the hardest Montana winters.

Basement utility room with copper pipes and two blue water heaters against exposed wood framing

When it's below zero in Billings, your heating system can't afford a bad install. Prime Plumbing installs, upgrades, and repairs boiler systems and hydronic heat that run efficiently and reliably all winter long.


Whether you want quiet, even in-floor radiant heat in a new build, a snow-melt system for the driveway, or a repair on an aging boiler, our plumber sizes and installs it correctly the first time — so you get comfortable heat and lower operating costs for years.


Boiler & Radiant Services

Black checkmark inside a circle icon on a white background

New boiler installation & proper sizing

Black check mark inside a circle icon on a white background

Boiler repair & seasonal maintenance

Black checkmark inside an open circle icon indicating success or completion

In-floor radiant heat systems

Black checkmark inside a circle icon on a white background

Snow-melt for driveways & walkways

Black checkmark inside a circle icon on a white background

Baseboard & hydronic heating

Black checkmark inside a circle icon on a white background

System upgrades & efficiency retrofits

Industrial boiler room with silver tank, pipes, and two red heating units under yellow piping.
Black shield icon with a white checkmark, indicating security or verified status

Licensed & Insured

Black five-pointed star icon on a white background

5.0 Google Rating

Black circular badge with a white checkmark and ribbon at the bottom.

1-Year Warranty

Black document icon with a white checkmark and folded corner

Free Estimates

Red circular logo with white target-like crosshairs and stylized letter P

How The Job Goes

No runaround and no mystery — here's how we run the work from first call to finished job.

Blank white image with a narrow black vertical border on the right edge

01 - Size it right

Our plumber looks at your home's actual heat loss — square footage, insulation, windows, Montana design temperatures — and sizes the boiler to the load. Oversized boilers short-cycle and die young; undersized ones never keep up at 20 below.

Blank white image with a narrow black vertical border on the right edge

02 - Clear estimate, honest options

You get a written estimate with real options — repair vs. replace, standard vs. high-efficiency — and a straight recommendation on which makes sense for your house and budget.

Blank white image with a narrow black vertical border on the right edge

03 - Clean installation

The boiler, piping, zones, and controls go in to manufacturer spec, pressure-tested and purged. Radiant loops and snow-melt zones are balanced so every room — and every square foot of driveway — gets the heat it should.

Blank white image with a narrow black vertical border on the right edge

04 - Fire it and walk it

Our plumber fires the system, verifies temperatures and pressures, and shows you the controls, the shutoffs, and what maintenance it actually needs. One-year warranty on the workmanship.


Good To Know

Boiler Systems & Radiant Heat questions, answered straight

Still wondering about something? Call or text and you'll reach our plumber directly — the plumber doing the work, not a call center.

  • How long does a boiler last in Montana?

    A well-installed, well-maintained boiler commonly runs 15 to 30 years — cast-iron units often even longer. What kills them early is bad sizing, dirty system water, and skipped maintenance. If yours is past 20 years or limping through winters, it's worth having us look at it before it quits in January.

  • Should I repair my old boiler or replace it?

    If the repair is small and the boiler has life left, fix it — we'll tell you straight. But when an older unit needs a major component, or it's costing you noticeably more to run each winter, replacement usually wins. You'll get both numbers and an honest recommendation, not a sales pitch.

  • What does a new boiler system cost?

    It depends on the size of your home, the efficiency level you choose, and how much of the existing piping can be reused. Rather than quote a range that means nothing for your house, our plumber looks at your system and gives you a firm written estimate — free, with options laid out.

  • Is in-floor radiant heat worth it here?

    For Montana winters it's hard to beat — even, quiet heat with no blowing dust, warm floors on below-zero mornings, and efficient operation because the system runs at lower water temperatures. It's easiest to add during construction or a remodel, so plan it early if you're building.

  • When should I have my boiler serviced?

    Early fall, before the first real cold snap. A pre-season check catches weak parts, purges air, and verifies the system is ready — far better than discovering a problem the first below-zero night when every heating contractor in Billings is buried in calls.

  • Do snow-melt systems really work for driveways?

    Yes — hydronic snow-melt keeps driveways, walks, and steps clear all winter without shoveling or salt damage. The tubing goes in when the concrete is poured, so it's a decision to make before flatwork, not after. If you're pouring new concrete, it's the right time to ask.

Blank white image with a narrow black vertical border on the right edge

FROM THE RESOURCE SHELF

Guides related to boiler systems & radiant heat

Two blue water heaters with white vent pipes in an unfinished utility room with exposed copper plumbing
October 15, 2025
Your boiler is about to work hard for six straight months. An hour of attention in October beats a breakdown in January.

SERVICE AREA

Keeping homes and businesses warm across Billings, Laurel, Hardin, Red Lodge, and northern Wyoming. Schedule a free estimate before the cold sets in.

Billings, MT

Laurel, MT

Hardin, MT

Red Lodge, MT

Northern Wyoming


Get It Done

Get a real number for your new construction project — free, in writing, from the plumber who'll do the work.

406-426-3128